|Green Pass||Resistance Between 0.75 to 10 Meg Ohms|
|Red Fail||Resistance below 0.75 OR above 10 Meg Ohms|
|Audible Alarm||Sounds for open OR FAIL condition|
|Battery Status||By Dual Color LED|
|Test actuation||By pressing metal sensor plate|
|Power supply||9 Volt Battery|
|Dimensions||135 x 70 x 25 mm|
|Weight||App. 135 Gms with battery|
|Calibration||Recommended every 12 months|
|Optional||Instruction Board, Carry Case & Door Access systems|
|Dimension||180 X 100 X 45 MM|
|Weight||300 Grams (With battery)|
|Indicating Range||+/- 1999V|
|Display||3 ½ Digit LCD Display|
|Test Surface||S.S. Plate|
|Power Supply||9V Battery|
|Calibration||Recommended once in 12 months|
|Accessories||Instruction Board with Instrument Fixing Clamp & 1 Meg Ohms Molded Grounding Cord.|
|Pass Band||Wrist strap 0.75 to 10.0 meg ohm|
Footwear 0.75 to 35.0 meg ohm
|Actuation||By gently pressing metal sensor plate|
|Dimensions & Weight||(instrument) 125 x 75 x 29 mm 150 gms|
(stand) 400 x 400 x 950 mm ht. 5 Kgs
IDEAL Wrist Strap Monitor can continuously monitor if the wrist strap is well and it is grounded well. It suitable for the environment which has a high requirement for the anti-static. It confirms that whether the static electricity from human body has been discharged through the real-time monitoring, in this way the losses caused by the static electricity can be effectively minimized.
It is fixed on as above figure.
Rip off the adhesive tape’s cover paper under the monitor and stick it on the worktable.
Not to calibrate the wrist strap.
Monitor whether the wrist strap is connected well in real time.
Monitor whether the grounding is well in real time.
One Power Supply can supply for sever wrist straps at the same time (decided by the load capacity of Power Supply.)
Design portable and compact, easy to use.
Output Voltage 8~12V DC
Working Current <50mA (12VDC)
Dimension 75*46*27 (mm)
Weight 50g (Without Accessory)
*Connecting line for Power Supply 2mm (Double-edged)
*Power Supply 8~12V DC (Only use inductance Transformer)